Yoshitake AL-6 is the extension of AL-5 with larger size. Hand Lever for Testing and Maintenance.
Yoshitake AF-10EN is made to DIN standard / PN 16 to serve the European market. Comply to ISO4126-1: 2013.
AF-5 is Full Bore type that discharge high Steam Capacity. Used mainly for Boiler and Header.
Yoshitake AL-140 is all Stainless Steel for Chemical & Food users. Compact and very Durable with wide set pressure range.
Jual Yoshitake Stainless Steel Safety Relief Valve series AL-140H untuk Uap, Udara dan Air. Di-pakai untuk prosess di-pabrik makanan dan pharmacy untuk kebutuhan Hygienic.
Obsolete product.
Yoshitake AL-300T is Soft Seat relief valve ideal for Tight Shut-Off used for Water & Air.
Yoshitake AL-4T is bigger size for Water & Air use. It is tight Shut-Off due to PTFE Seat.
Jual Steam Trap tipe Thermodynamic / Disc merek Yoshitake. Tekanan 20 Kg/Cm2 dengan kapasitas / Flow Rate 1,100 Kg/Hr. Size 1/2" s/d 1" Screw & Flange JIS 10K.
Jual Thermodynamic Steam Trap dengan tekana 42 Bar dan panjang sama dengan beberap merek2 lain. Yoshitake TSD-42 / Drat dan TSD-42 / Flange di-pakai tidak untuk Proses karena kapasitasnya kecil.
Yoshitake series TSF-10CF is Carbon Steel body will caters for pressure up to 32 Bar. The load max is 2,300 Kg/Hr.
Yoshitake Float & Thermostatic Steam Trap - Series TSF-13CF is made from Carbon Steel and withstand pressure up to 32 Bar, Has high Capacity 25,000 Kg/Cm2 ideal for Process use.
Jual Float & Thermostatic Steam Trap merek Yoshitake TSF-8-21 yang mampu untuk tekanan s/d 21 Bar dengan kapasitas 1900 Kg/Hr. Tersedia juga TSF-8-5 / 5 Bar dan TSF-8-10 / 10 Bar. Di-banding series TSF-10, TSF-8 memiliki Tekanan kerja dan kapasitas yang sama. Bedanya, TSF-10 memiliki fitur Selectable Flow Direction untuk pemasangan Vertikal atau Horisontal.
Jual F&T / Float & Thermostatic Steam Trap merek Yoshitake TSF series. Ideal untuk Proses / Kapasitas besar. TSF 8, 10, 11, 12, 13 dan TSF 8F, 10F, 11F, 12F, 13F. Flow Rate dari 50 ~ 25,000 Kg/Hr dan Tekanan 5 ~ 21 Bar.
Yoshitake VB-7 series Vacuum Breaker / Vacuum Relief Valve is installed downstream of Steam Control Valve whereby Vacuum is formed when the valve 100% close. This is due to steam becomes condensate as it losses heat. As the valve open, high pressure steam hits the condensate and creating Water Hammer. Not only that, the trapped condensate which can not be evacuated by Steam Trap could cause Corrosion.
Jl. Pinangsia Timur No.44 Jakarta 11110, Indonesia
Mon to Fri, 8 am to 4.30 pm Sat - Sun (Close)
sales@gamako.co.id +62 21 6902756, +628111707861,