Yoshiotake GD-21 Differential Pressure Regulator is used in HVAC to maintain Constant supply and return pressure in a closed circuit. This will maintain Pump Head and giving enough flow to Air Handling Unit.
Yoshitake AL-150 is a must to be installed downstream of PRV station as a Safety to protect costly Equipment in the event PRV is damaged resulting in increase of pressure. AL-150 is Compact and can be used for Steam and Liquids ( Consider allowable Leakage due to Metal Seat ). Replaces old model AL-1, AL-15, AL-160.
Jual Safety Relief Valve merek Yoshitake AL-150H untuk tekanan 16 Bar. Lift type design untuk pelindung Tanki Angin, Equipments dll.
Yoshitake AL-300 is Flange version and has bigger Capacity compare to AL-150. Installed mainly after PRV to protect Equipment from attack of High Pressure should PRV fails. Replaces old model AL-3.
Yoshitake AL-4 is bigger size Safety Valve for Steam. It also has higher pressure setting. Used in the mainline to protect any increase in Pressure.
Yoshitake AL-5 is for Critical application whereby occasional Blow Down is required to make sure Disc does not stick at the Seat. Another use of Hand Lever is to blast away dirt from the Trims due to Dirty steam.
Yoshitake AL-6 is the extension of AL-5 with larger size. Hand Lever for Testing and Maintenance.
Yoshitake AF-10EN is made to DIN standard / PN 16 to serve the European market. Comply to ISO4126-1: 2013.
AF-5 is Full Bore type that discharge high Steam Capacity. Used mainly for Boiler and Header.
Yoshitake AL-140 is all Stainless Steel for Chemical & Food users. Compact and very Durable with wide set pressure range.
Jual Yoshitake Stainless Steel Safety Relief Valve series AL-140H untuk Uap, Udara dan Air. Di-pakai untuk prosess di-pabrik makanan dan pharmacy untuk kebutuhan Hygienic.
Obsolete product.
Yoshitake AL-300T is Soft Seat relief valve ideal for Tight Shut-Off used for Water & Air.
Yoshitake AL-4T is bigger size for Water & Air use. It is tight Shut-Off due to PTFE Seat.
Yoshitake VB-7 series Vacuum Breaker / Vacuum Relief Valve is installed downstream of Steam Control Valve whereby Vacuum is formed when the valve 100% close. This is due to steam becomes condensate as it losses heat. As the valve open, high pressure steam hits the condensate and creating Water Hammer. Not only that, the trapped condensate which can not be evacuated by Steam Trap could cause Corrosion.
Jl. Pinangsia Timur No.44 Jakarta 11110, Indonesia
Mon to Fri, 8 am to 4.30 pm Sat - Sun (Close)
sales@gamako.co.id +62 21 6902756, +628111707861,
